| |
|
|
TempTell
$199.95 |
 |
Add to Cart |
|
|
|
TempTell Specifications:
|
|
|
| TempTell is a device that measures and records temperatures from 0 degrees Celsius to 1023 degrees Celsius. It has a programmable upper limit that triggers a two-tone alarm when the measured temperature exceeds the set limit. It also has a programmable low limit that sounds a single tone every 30 seconds when the measured temperature is below the low limit. TempTell is delivered from the factory with its programmable parameters set to default values that allow it to be used as an exhaust stack temperature monitor and alarm with no external accessories or programming necessary. |
| TempTell can be integrated with an alarm system through its dry contact relay outputs. It also has an RS-232 interface for configuration and temperature reporting. In addition, TempTell can internally log up to 4000 temperature samples and report them through the RS-232 interface on command. When used in its programmable mode TempTell can be used to monitor and record temperatures for a wide range of applications. |
|
|
Thermocouples: |
Your choice of thermocouples will depend on your application. The following standard thermocouples are available: |
 |
Bolt-on Thermocouple - 60" braided fiberglass insulation terminated in a through-hole connector. This thermocouple is designed for bolting to a surface, such as a stove exhaust stack. Because of the bolt-through connector, it will have a slower response time than the bare-junction thermocouples. This thermocouple is suitable for temperatures up to and beyond 1023 C. | |
| 60" Bolt-on thermocouple | $24.95 | Add to Cart |
Bare Junction Thermocouple - 36" braided fiberglass insulation terminated in a
bare thermocouple junction. This thermocouple is designed to touch to a surface,
hang in free air, or be immersed in a liquid. Because of the bare junction it will
have a very fast response time. This thermocouple is suitable for temperatures up to and beyond 1023 C.
| ||
| 36" bare junction thermocouple | $14.40 | Add to Cart |
| Self-Adhesive Thermocouple - 36" braided fiberglass insulation terminated in a bare thermocouple junction with a self-adhesive pad. This thermocouple is designed to stick on to a flat smooth surface. Having a bare junction it will also have a very fast response time. Due to the adhesive this thermocouple is suitable only for temperatures up to 350 F (175 C). |
| 36" Self-adhesive thermocouple | $24.00 | Add to Cart |
| Custom thermocouples are available for special applications. Email with your application's details to request a quote. | |
|
|
Accessories: |
The following standard accessories are available: |
RS-232 Cable - 6' (approx) RS-232 cable terminated in a DB9 connector. This cable allows you to connect your TempTell to a PC's serial port. |
|||
|
6 Piece Precision Screwdriver Set - A great addition to any tool box. You will need the 0.1" blade for the TempTell's terminal connectors if you don't already have one. |
|||
| |||
|
|
Copyright © 2005 http://www.ArticulationLLC.com - All Rights Reserved. |
|
|
This web site was last updated on 9/23/2005 | |
|
|